Torque limiter coupling SIK
Product versions
For direct drives, the torque limiter couplings are equipped with an attachment in the form of the tried-and-tested ASK sliced coupling or with metal bellows. Shaft offsets can be equalized in the same way. Under cramped conditions, the torque limiter coupling can also be fitted directly in the hubs, e.g., as in the case of a toothed belt pulley (or similar). The torque limiter couplings are available in 6 different versions.
Material: Steel, stainless steel also available on request
SIK-N 1
Safety Coupling with conical hub; for indirect drive; 0.2 to 3000 Nm
Order example: SIK-N1-2500 D=80H7
SIK-N 2
Safety Coupling; for indirect drive; with keyway connection; 0.2 to 3000 Nm
Order example: SIK-N2-500 D=25H7
SIK-N 3
Safety Coupling with metal bellow; for direct drives; up to 1800 Nm
Order example: SIK-N3-1500 D=80H7 mit Stahlklemmnabe
SIK-N 4
Safety Coupling with conical hubs and metal bellow; dircet drives; 5 Nm to 2700 Nm
Order example: SIK-N4-2500 D=60H7
Delivery information
- The torque limiter coupling is set to a disengagement torque of between 0.2 and 3000 Nm at the factory.
PDF file